PLEASE DO NOT PLACE ANY ORDERS AT THE PRESENT TIME.

This listing is for the 3D Printed Parts (only) for the EEW Maker Kit, for everything else (electronic parts and other bit and pieces) please refer to Dreaming Robots’ Kickstarter page (link here).

The 3D Printed Parts include:

1. Base Bottom

2. Base Top

3. Tension Dial

4. Front Maiden

5. Back Maiden

6. Motor Pulley

7. Bobbin Disk Front

8. Bobbin Disk Back

9. Bobbin Tube

10. Flyer Pulley

11. Flyer

12. (2x) Flyer Arm

13. (2x) Sliding Hook

14. Display Arm

15. Display Lid

16. Reducer

17. Twist Keeper

18. Threader

These parts are print to order, you may choose your own colours (available colours to be added) from the dropdown list. Please allow up to 10 working days for your order to dispatch, if the wait time is longer than anticipated due to high demand you will be notified in the first instance.

There are 4 options for ordering:

• Kit with 1 bobbin - $110

• Kit with 3 bobbins - $135

• Kit with 5 bobbins - $170

Please note that the Maker Kit Kickstarter package comes with enough bearings for 5 bobbins.

We are an Authorised 3D Printing Partner for Dreaming Robots servicing Australia and New Zealand.

Plying tool for plying your singles using the technique of “Andean bracelet” - please see the short video below for demo.

Wingspan: 12cm
Length without the dowel: 14cm
Length with the dowel: 21cm
Thickness: 2cm
Dowel diameter: 0.8cm

The dowel is removable. This tool is printed in PLA (polylactic acid) which is made with cornstarch or sugar cane, it is biodegradable if buried underground.

This is an original Cat & Sparrow Fibres design.

** Please note that this item is print to order, please allow up to 5 working days for your order to despatch. If you need this urgently please contact Cat: cat@catandsparrow.com.au

Please note that this tool should be kept away from direct heat source or very hot environment such as hot cars in summer to avoid warping.

Cat paw shaped diz with 3 holes

Measurements: 5cm x 4.5cm

Hole diameters: 4mm, 6mm, 8mm

Printed with PLA (polylactic acid) which is made from plant materials such as corn starch or sugar cane, it is a biodegradable material.

** do not leave it in hot environment (50C+) or it will melt/shrink

This is an original Cat & Sparrow design

Do you always lose your orifice hooks? I know I’ve launched my EEW6 hook across the room multiple times 😆 Fear no more! These hooks are designed by Maurice (maker of the Electric EEl Wheels) and made available for 3D printers.

I did have to modify the original design slightly as it was a tad too big to fit into my EEW6 slot, this one fits perfectly.

Even if you don’t have an EEW6 it can still be used with other spinning wheels, it is quite flexible so it’s rather handy.

Comes in set of 2

You can choose the colour when adding the item to the cart or leave a message at the checkout.

These are print to order, please allow up to 5 business days before despatch.

3D printed with PLA (Polylactic Acid) which is a renewable resource, usually from corn starch or sugar cane.

DO NOT leave in hot cars or other hot places.

Travel-Friendly Niddy Noddy: 1m or 1.5m Skeins!

Meet your new favourite portable niddy noddy! Designed and printed by Cat & Sparrow Fibres in Melbourne, Australia, this handy tool is perfect for making sample skeins or taking your craft on the go. It easily separates into four flat parts for compact packing.

Versatile Skein Sizing:

• Standard: Wind a 1-meter skein

• With Extension: Create 1.5-meter skeins

Eco-Friendly & Durable Design:

Our niddy noddies are 3D printed from PLA (Polylactic Acid), a d made from corn starch or sugar cane. This makes them a great sustainable choice for your fibre arts tools.

Important Care Note:

To prevent warping, do not leave this PLA item in hot cars or other hot places.

Choose your preferred colour from the dropdown list as you add the item to the cart (there will be a pop up screen for you to choose the colour)